MAT-150FFS 4


Thermoforming machine MAT-150FFS 4 "MultiPack" is a multifunctional thermoforming machine allows you to work in several different ways, including using a material plug assist for the production of blisters with increased rigidity.


Thermoforming machine MAT-150FFS 4 "MultiPack" in it's basic configuration allows you:

  • production of blisters with cutting by contour (simple or complex shapes), trays, Clamshell blister packaging. A Clamshell is a one piece container consisting of two halves joined by a hinge area which allows the structure to come together to close. Clamshells are usually made of a shaped plastic material, in a way that is similar to a blister pack. The name of the clamshell is taken from the shell of a clam, which it resembles both in form and function;
  • production of a blister package (with the function of welding blister by roll cover material - foil, laminated paper, multilayer films etc.)


Base model advanced options (are not included into the price of the basic configuration):

  • Carton cards extracting and stacking unit: in-line, allows you to produce a blister package with the following welding by the cover material - carton cards.
  • Tri edge blister folding unit: in-line, allows you to produce a blister with three-sided folded edges.
  • Stacking unit for formed products: in-line, designed for counting and stacking comleted blisters.
  • Electronic dater: in-line, allows you to label your package.

Machine specifications:

Climatic performance in accordance with GOST 15150-69:
УХЛ 4.2
Power supply:
380V, 3F, 50Gz
Maximum power consumption:
8.0 kWt
Compressed air pressure:
0.6 - 0.8 MPa
Average (nominal) compressed air consumption:
1.4 m3/min
Type of coolant:
Flowing water with a temperature of not more than 24°С
Maximum dimensions of manufactured products:
210 × 285 mm
Maximum depth of manufactured products:
60 mm
Plastics types:
Plastics thickness:
0,2 - 0,6 mm
Maximum cutting contour shift according to forming contour:
1 mm
Maximum cutting contour shift according to forming contour:
2 mm
Method for adjusting the contours of the coating material:
by periodically entering corrections from the control panel
Coating material:
  • paper with thermo lacquer
  • film with thermo lacquer
  • laminated foil
  • laminated paper
  • laminated films
Stacking products into the blister:
Welding method:
The initial length of the blister (before the bending):
no more than 210 mm
8 - 15 cycles/min (depending on material thickness and type and the number of places in the form)
Overall dimensions (length × width × height):
6500 × 1800 × 1800 mm
1700 kg


Working thermoforming machine MAT-150FFS 4 (blister forming -> packing into blister -> welding with cover material -> cutting by contour)


Working thermoforming machine MAT-150FFS 4 - producing blister (w/o packing & welding functions)

Автор : btamedia

Why us?

We guarantee quality in all phases - from development and production, to delivery and commissioning of our products.