The purpose is to manufacture using the blow molding method in the negative duralumin moulds products such as a blister, a chocolate tray, a box, a rectangular tray with individual cutting off made of film roll material PVC, PET, PS, OPS according to the non-waste technology.
Climatic performance in accordance with
|
УХЛ 4.2 |
Degree of protection: |
IP 3.0 |
Drive Type: |
pneumatic |
КClass purity of the compressed air in accordance with GOST 17433: |
not worse than 8 |
Power supply: |
200V, 1F |
Maximum power consumption: |
4,0 kW |
Average power consumption: |
3,0 kW |
Compressed air pressure: |
5 - 10 bar |
Maximum air consumption: |
0,34 m3/min |
Average (nominal) compressed air consumption: |
0,3 m3/min |
Type of coolant: |
Tap water, industrial water, antifreeze, glycol solutions (liquid or reusable with water cooler) |
Maximum consumption of coolant: |
2,5 l/min |
The method of heating the material: |
contact, one-sided |
Molding method: |
pneumatic |
Method for separating the products: |
cutting tools |
Types of manufactured products: |
negative with a bend |
Maximum dimensions of manufactured products: |
250 × 350 mm |
Maximum depth of manufactured products: |
55 mm |
Plastics types: |
HIPS, SB, OSP, PVC, PET |
Plastics thickness: |
0,18 - 0,4 mm |
Maximum width of plastics: |
250 mm |
Maximum roll diameter of plastics: |
500 mm |
Maximum weight of a plastics roll: |
50 kg |
Performance: |
7,5 - 34 cycles/min |
Guaranteed load factor when changing tooling is not more than 1 time per week: |
0,91 |
Overall dimensions (length × width × height): |
2427 × 611 × 1572 мм |
Weight:: |
180 kg |
Average changeover time: |
1.5 hours |
"We do it today, others will think about it only tomorrow" – here is a principle by which our company is guided since 1997. That’s why our equipment enjoys popularity not only among small and medium enterprises, but also among well-known large enterprises which have a continuous production process.